Car model air pump manual 1. This machine is suitable for tires, inflatable beds, balls and inflatable boats of automobiles, motorcycles, and bicycles. It has a wide range of applications, fast inflation speed and stable quality. 2. On highways, off-road tours or any place, when the car tires suddenly leak, it can play its emergency function. The tire pressure can be charged to the rated pressure in 2 minutes, and then you can safely drive to do important tasks or drive. Going to the auto repair shop to repair tires will not delay your precious time. 3. Keep the car tires at the correct tire pressure at any time, which can not only save gasoline, but also protect the tires and ensure driving safety. 4. With night lighting work lights, it integrates pumping, compass and pressure measurement. The internal wire-retracting design of the whole machine is ingenious and space-saving. 5. The shape is novel and beautiful, easy to carry and light. Instructions: 1. Insert the tip of the rubber tube directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has circulated, and then tighten the air nozzle. 2. Take out the plug and plug it directly into the cigarette lighter. 3. Start the car motor and turn on the air pump switch to start charging. The best continuous charging time is within 15 minutes. If necessary, the air pump needs to be cooled. 4. When inflating, the pointer of the meter will rise with the actual tire pressure. When the pointer reaches the appropriate tire pressure (the standard pressure of the front and rear tires of each car is marked on the inside of the driver's door frame or the fuel tank cap), turn off the switch and pull out Plug, the inflation work is completed. Machanical Properties Material PP, Nylon, Zinc, Aluminum, Copper, etc Electrical Characteristic Rated Power 12V10A Maximum, 3.7A non-load, 5-7A inflating tires; Switch Built-in On/Off switch Inflating Characteristic Piston & Cylinder 16mm Output Volume 12-15LPM Inflating Speed Appr. 6